Rok Cup, news on technical regulations
Bad weather is all over Italy but Rokkers are preparing their weapons to go back at the track. Drivers from Sicily are going to start first, actually on next weekend they’re facing the first competition of the season at the Vittoria circuit (Ragusa), valid as the first race of the South area.
While awaiting Regulations to be approved by CSAI we wish to reveal in advance some important news concerning Rok Cup 2013 Regulations.
We are glad to announce that no significant modifications have been made, but a few only as follows:
PETRONAS ROK LUBE. The technical change for any of the five Rok categories concerns the adoption of the new Petronal Rok Lube oil.
BRANDED PISTONS. Mini Rok, Junior Rok, Rok and Super Rok categories, starting from the 1st of May 2013, will have to employ “Vortex” pistons. The brand will be welded on the piston.
Concerning the Rok Shifter, it is mandatory to use Vortex pistons from the first race.
MINI ROK PLUG LEAD. It is mandatory to employ the plug lead with reference no. PVL 401 222
JUNIOR, ROK AND SUPER IGNITION. PVL 1036/ 980/500-177 ignition will not be used anymore. In 2013 drivers will be allowed to compete by employing PVL ignitions 500843/500980/500210.
ROK SHIFTER. National and International C, as well as Prodriver are the only admitted licenses. Owners of the mentioned licenses can compete in the Rok Shifter category, starting from 15 years old.
In the aim of avoiding that young experienced driver join the category, the maximum age allowed is 30 years old, for the owners of a International B License only.
SPECIAL TROPHY: ROOKIE, ELITE 30 AND LADY. For the definition of special trophies’ rankings only, scores will be assigned according to a special rule according the number of drivers attending the race. So, the scores assigned on the occasion of special trophies (only in this case) will be multiplied by the number of drivers attending the specific event.
MINI ROK
- The cylinder shall be measured by means of one thickness gauge only, as provided for any international CIK competitions. Features of the gauge are available in the specific fiches.
- From the 1st of May it is mandatory to employ “Vortex” pistons. The brand is welded with a casting process.
- Quotas are available on all technical drawings and for the cylinder.
- It is mandatory to employ the plug lead with reference number PVL 401 222
- Fiches of filter-carburettor fixing connectors have been added.
JUNIOR ROK
- The cylinder shall be measured by means of one thickness gauge only, as provided for any international CIK competitions. Features of the gauge are available in the specific fiches.
- From the 1st of May it is mandatory to employ “Vortex” pistons. The brand is welded with a casting process.
- Additional quotas concerning the inside of the carter have been added.
- Picture of the reed valve conveyor with referring quota has been added.
- PVL 1036/ 980/500-177 ignition is no longer used.
- The drawing of the “exhaust silencer connector” has been updated with other quotas.
- The use of Dell’Orto variable jet Kit is not be admitted anymore.
ROK
- The cylinder shall be measured by means of one thickness gauge only, as provided for any international CIK competitions.
- From the 1st of May it is mandatory to employ “Vortex” pistons. The brand is welded with a casting process.
- Additional quotas concerning the inside of the carter have been added .
- Picture of the reed valve conveyor with referring quota has been added.
- PVL 1036/ 980/500-177 ignition is no longer used.
- The drawing of the “exhaust-silencer connector” has been updated with other quotas.
- The use of Dell’Orto variable jet Kit is not be admitted anymore.
SUPER ROK
- From the 1st of May it is mandatory to employ “Vortex” pistons. The brand is welded with a casting process.
- Additional explanations on the use (mandatory) of the seal on carter coupling processes.
- Picture of the reed valve conveyor with referring quota has been added.
- PVL 1036/ 980/500-177 ignition is no longer used.
- The use of Dell’Orto variable jet Kit is not be admitted anymore.
- The drawing of the “exhaust manifold connector” has been introduced (with referring quotas).


